Products

20# – JIS:S20C/S22C Carbon Steel Pipe Krobo Steel

Product Introduction

20# steel pipe steel pipes are made of steel ingots or solid tube blanks that are perforated into capillary tubes, and then made by hot rolling, cold rolling or cold drawing.

The raw material for rolling seamless pipe is round tube billet, and the round tube embryo should be cut by cutting machine to grow billets with a length of about 1 meter, and transported to the furnace by conveyor belt. The billet is fed into the furnace to be heated at a temperature of about 1200°C. The fuel is hydrogen or acetylene. The temperature control in the furnace is a key issue. After the round tube is out of the furnace, it must be pierced through a pressure piercer. Generally, the more common piercer is the cone roll piercer. This kind of piercer has high production efficiency, good product quality, large perforation diameter expansion, and can wear a variety of steel types. After piercing, the round tube billet is successively cross-rolled, continuous rolled or extruded by three rolls. After extrusion, the tube should be taken off for sizing. Sizing by high-speed rotary cone drill holes into the billet to form a tube. The inner diameter of the steel pipe is determined by the length of the outer diameter of the drill bit of the sizing machine. After the steel pipe is sized, it enters the cooling tower and is cooled by spraying water. After the steel pipe is cooled, it will be straightened. After straightening, the steel pipe is sent to the metal flaw detector (or hydraulic test) by the conveyor belt for internal flaw detection. If there are cracks, bubbles and other problems inside the steel pipe, they will be detected. After the quality inspection of steel pipes, strict manual selection is required. After the quality inspection of the steel pipe, paint the serial number, specification, production batch number, etc. with paint. And hoisted into the warehouse by crane.

20# Carbon Steel Chemical Composition:

Element Composition (%)
Carbon (C) 0.17-0.23
Silicon (Si) 0.17-0.37
Manganese (Mn) 0.35-0.65
Phosphorus (P) ≤0.035
Sulfur (S) ≤0.035
Chromium (Cr) ≤0.25
Nickel (Ni) ≤0.25
Copper (Cu) ≤0.25

 

Application:

Manufacture parts that require little stress and high toughness, such as automobile bodies, containers, deep-drawn containers, pipes, gaskets, etc., can be used for cold rolling, cold stamping, cold heading, cold bending, hot rolling and other processes. It can also be used as carburized parts and carbonitrided parts with low core strength.

Classification By Size:

The length is generally 6000mm, 1250mm,2200mm,12000mm, and the thickness is distinguished by cold rolling and hot rolling. Cold rolling mainly has thickness 1.0mm, 1.2mm, 1.5mm, 2.0mm, 2.5mm, 3.0mm. The main thickness of hot rolling is 3.0mm, 4.0mm, 6.0mm, 8.0mm, 10.0mm, and the width is generally 1000mm, 1219mm, 1500mm.Please contact customer service for general specifications.

 

Hot-rolled carbon steel pipe are produced by continuous hot-rolled carbon steel technology with hot-rolled steel strip or cold-rolled steel strip as the substrate. The hot-rolled carbon steel sheet is supplied as a rectangular flat plate by cross-cutting; the hot-rolled carbon steel sheet is supplied in coil form by coiling, and the hot-rolled carbon steel sheet coil can be divided into hot-rolled carbon steel sheet coil and cold-rolled carbon steel sheet Coils, they are mainly used in construction, home appliances, automobiles, containers, transportation and household business and other fields. Especially steel structure construction, automobile manufacturing, steel silo manufacturing and other industries.

 

Their main features are: strong corrosion resistance, good appearance quality, benefit from deep processing, economical and practical, etc.

Application range:

(1) After annealing, it is processed into ordinary cold rolling;

(2) The galvanizing unit with pre-annealing treatment device processes galvanizing;

(3) Panels that basically do not need to be processed.

Why Choose Us?

*Top 20 companies in steel industry trade volume.

*Customized processing steel one-stop purchase.

*Exports of steel exceeded tens of billions for 5 consecutive years.

**We have a complete set of testing equipment, such as ut & ET, hydraulic testing equipment, spectrometer, scanning electron microscope, etc, and have passed SGS TUV

Our Quality Assurance Policy has established guidelines for providing products and services that exceed customer expectations. certified company.